A Massey Ferguson tractor can use several different lights at the same time. Therefore, the fastest way to find a replacement is to identify both the tractor model and the installation position before comparing the lamp itself.
Use this guide to find four common lighting groups:
- Front Headlight – road-facing high beam, low beam, and position-light applications
- Work Light – wide-flood lighting for fields, implements, and nearby working areas
- Rear & Tail Light – indicator, brake, and rear position-light assemblies
- Cab Light – roof or cab-mounted lighting for the area around the tractor
You can also browse the complete Massey Ferguson Tractor Lights range for currently available replacement lamps.
For final fitment, always compare the full tractor model, OEM part number, mounting position, connector, dimensions, and required lighting functions.
Quick Massey Ferguson Light Reference
The table below provides a faster starting point by combining tractor model series + lamp position + recommended replacement.
| Massey Ferguson Model / Series | Installation Position | Light Type | Recommended TUFF PLUS Light | OEM Reference |
|---|---|---|---|---|
| 1523–1560 selected models | Front | Headlight | A0143 5.5 Inch LED Tractor Headlight / A0150 5.5 Inch Massey Ferguson Headlight | 3788220M91, 3788221M91, 4278938M92 |
| 5425–5480 selected models | Front | Headlight | A0143 / A0150 | 3788220M91, 3788221M91, 4278938M92 |
| 6445–6499 selected models | Front | Headlight | A0143 / A0150 | 3788220M91, 3788221M91, 4278938M92 |
| 7465–7499 selected models | Front | Headlight | A0143 / A0150 | 3788220M91, 3788221M91, 4278938M92 |
| 8450–8480 | Front | Headlight | A0143 / A0150 | 3788220M91, 3788221M91, 4278938M92 |
| 4200 / 4300 Series | Cab / Roof | Cab Work Light | F0255 40W Tractor Cab Light | Confirm original lamp |
| 6100 / 6200 Series | Cab / Roof | Cab Work Light | F0255 | Confirm original lamp |
| 8100 / 8200 Series | Cab / Roof | Cab Work Light | F0255 | Confirm original lamp |
| Selected 90mm recessed positions | Cab / Side / Rear working area | Work Light | F0337 90mm LED Work Light | Confirm original lamp |
| 5410–5480 selected models | Rear | Tail Light Assembly | D0124 Combination Tail Light | 4295458M1/M2, 4295459M1/M2, 3786690M91, 3786691M91 |
| 5600 / 5700 selected models | Rear | Tail Light Assembly | D0124 | Same OEM family |
| 6400 selected models | Rear | Tail Light Assembly | D0124 | Same OEM family |
| 6600 / 6700 selected models | Rear | Tail Light Assembly | D0124 | Same OEM family |
| 7400 selected models | Rear | Tail Light Assembly | D0124 | Same OEM family |
| 7600 / 7700 selected models | Rear | Tail Light Assembly | D0124 | Same OEM family |
| 8450–8480 | Rear | Tail Light Assembly | D0124 | Same OEM family |
This table narrows the search, but it does not replace final fitment confirmation. Production year, market specification, transmission version, mounting side, and previous repairs can affect the original lighting configuration.
Start with the Mounting Position
First, identify where the original lamp sits on the tractor.
A search for Massey Ferguson tractor lights can refer to several completely different products. For example, one tractor may use a road headlight at the front, wide-flood work lights around the cab, and a multi-function tail light assembly at the rear.
The main positions covered in this guide are:
- Front headlight
- Cab or roof light
- Recessed work light
- Side or rear work light
- Rear combination and tail light
Once you know the position, use the tractor model and OEM number to narrow the available replacements.
Front Headlights for Selected Massey Ferguson Tractors
Front headlights provide controlled illumination in the direction of travel. Depending on the original configuration, one housing may combine high beam, low beam, and parking or position-light functions.
For selected Massey Ferguson tractors, the A0143 5.5 Inch LED Tractor Headlight and A0150 5.5 Inch Massey Ferguson Tractor Headlight provide dedicated replacement options.
Their listed Massey Ferguson applications include selected models from the:
- 1500 Series
- 5400 Series
- 6400 Series
- 7400 Series
- 8400 Series
Representative models include 1523, 5455, 6475, 7480, and 8470.
Associated AGCO OEM references include:
- 3788220M91
- 3788221M91
- 4278938M92
Both A0143 and A0150 combine high beam, low beam, and parking-light functions. However, do not choose a headlight only because the front diameter looks correct. Mounting points, connector design, electrical functions, and installation depth should also match the original lamp.
When buyers search for Massey Ferguson vehicle headlights, they may find lamps with similar shapes but different functions. Always confirm whether the original position requires a road headlight or a general work light.
Cab and Roof Lights
Cab-mounted lighting serves a different purpose from a front road headlight. Instead of producing a controlled road beam, a cab light normally spreads illumination across the nearby ground, implements, and machinery surroundings.
The F0255 40W LED Tractor Cab Light fits selected Massey Ferguson applications in the:
- 4200 Series
- 4300 Series
- 6100 Series
- 6200 Series
- 8100 Series
- 8200 Series
F0255 produces a wide-flood beam with up to 3200 lumens. This beam type suits night fieldwork and other applications where the operator needs broad nearby visibility rather than a narrow forward-driving beam.
Before replacing a Massey Ferguson cab light, compare:
- Housing dimensions
- Installation depth
- Mounting-hole location
- Connector type
- Voltage
- Beam direction
- Available adjustment range
Pay particular attention to the area behind the lamp. A replacement may match the visible opening but still require different clearance inside the cab or roof panel.
90mm Work Lights for Recessed Positions
Some Massey Ferguson tractors and agricultural machines use compact recessed lamps around the cab or working area.
The F0337 90mm LED Work Light is designed for these work-light applications. It produces up to 5000 lumens from a 50W wide-flood optical system and operates on 9–32V DC.
Its beam spreads light across the nearby working area rather than creating a controlled road-driving pattern. This makes it suitable for applications where the operator needs to see implements, field edges, ground conditions, or obstacles around the tractor.
However, 90mm only describes the approximate lamp size. It does not confirm the lighting function.
A 90mm road headlight and a 90mm work light may fit a similar opening while producing completely different beam patterns. Therefore, check the original lamp function, beam direction, installation depth, connector, and mounting system before ordering.
For more general equipment-lighting options, browse the LED Work Light range.
Rear & Tail Lights for Massey Ferguson Tractors
Rear lighting performs signalling functions rather than primary work illumination.
A typical Massey Ferguson rear light may combine several functions inside one housing. These can include an amber turn indicator, red brake light, and rear position or tail light.
The D0124 LED Combination Tail Light combines all three functions in one rear lamp assembly.
D0124 fits selected Massey Ferguson tractors from the:
- 5400 Series
- 5600 Series
- 5700 Series
- 6400 Series
- 6600 Series
- 6700 Series
- 7400 Series
- 7600 Series
- 7700 Series
- 8400 Series
Representative applications include 5455, 5612, 5713 S, 6475, 6718 S, 7480, 7624, 7726, and 8470.
Associated Massey Ferguson and AGCO OEM references include:
- 4295458M1
- 4295458M2
- 4295459M1
- 4295459M2
- 3786690M91
- 3786691M91
When replacing a Massey Ferguson tail light assembly, check all signalling functions rather than only the external housing shape.
For example, the original lamp may use separate circuits for the indicator, brake light, and tail light. The replacement must support the same functions and connector configuration.
Left-hand and right-hand positions should also be checked when the tractor uses different OEM numbers on each side.
Why the Tractor Series Is Not Enough
The tractor series is useful for narrowing the search, but it cannot identify one specific lamp.
For example, a Massey Ferguson 6400 Series tractor may use:
- A front headlight
- Cab-mounted work lights
- Recessed work lights
- Rear combination lights
As a result, searching only for “Massey Ferguson 6400 light” still leaves several possible replacement types.
Lighting configurations can also vary according to:
- Exact tractor model
- Production year
- Destination market
- Cab specification
- Transmission version
- Original lighting package
- Left or right mounting side
- Previous repairs or modifications
Therefore, combine the model + position + OEM number whenever possible.
Headlight or Work Light?
A common replacement mistake is choosing a work light for a road-headlight position simply because both lamps provide forward illumination.
A headlight normally uses a controlled beam for the direction of travel. Depending on the lamp, it may provide:
- High beam
- Low beam
- High and low beam
- Parking or position light
By contrast, Massey Ferguson work lights usually use flood or wide-flood patterns to illuminate:
- Implements
- Field edges
- Ground around the tractor
- Loading areas
- Nearby obstacles
- Rear and side working areas
Therefore, wattage and lumen output should not determine the replacement by themselves. Beam pattern and intended function matter just as much.
OEM Replacement Information
OEM part numbers provide one of the strongest references when identifying Massey Ferguson tractor lights.
Current TUFF PLUS replacement examples include:
| OEM / AGCO Part Number | Typical Function | TUFF PLUS Replacement |
| 3788220M91 | Front headlight | A0143 / A0150 |
| 3788221M91 | Front headlight | A0143 / A0150 |
| 4278938M92 | Front headlight | A0143 / A0150 |
| 4295458M1 | Rear combination / tail light | D0124 |
| 4295458M2 | Rear combination / tail light | D0124 |
| 4295459M1 | Rear combination / tail light | D0124 |
| 4295459M2 | Rear combination / tail light | D0124 |
| 3786690M91 | Rear combination / tail light | D0124 |
| 3786691M91 | Rear combination / tail light | D0124 |
However, an OEM number should still be checked together with the exact model and installation position.
If the original part number is missing or unreadable, take clear photos of:
- Front of the lamp
- Rear housing
- Connector
- Mounting points
- Remaining labels
- Lamp installed on the tractor
These details can help identify the correct replacement more accurately.
How to Confirm the Correct Massey Ferguson Light
Before ordering a sample or requesting a quotation, collect the following information:
- Full Massey Ferguson tractor model
- Production year
- Transmission or configuration designation
- OEM or AGCO part number
- Front, rear, side, cab, or roof position
- Left-hand or right-hand mounting side
- Lamp dimensions
- Mounting-hole spacing
- Connector photograph
- Required lighting functions
For example, “Massey Ferguson 5700 rear light” provides a useful starting point, but “Massey Ferguson 5713 S DYNA 6 right rear tail light with OEM label and connector photos” gives much stronger fitment information.
Recommended Massey Ferguson Tractor Lights
For selected front-headlight applications, compare:
Cab and work-light applications:
For rear signalling applications:
For additional options, browse the complete Massey Ferguson Tractor Lights category.
Find the Correct Massey Ferguson Tractor Light
The most reliable replacement search starts with three details:
Tractor Model + Installation Position + OEM Part Number
After that, compare the connector, dimensions, mounting points, voltage, beam pattern, and lighting functions.
If your model is not listed, send us the full Massey Ferguson model, production year, original lamp photos, mounting position, connector, and OEM part number. We can use this information to narrow the compatible replacement before sample or bulk ordering.